Tick Performance Street Heat Stage 2 Camshaft for LS2 Engines

Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS2 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge!  Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.

Tick Performance Street Heat Stage 2 Camshaft for LS2 Engines
233/240 | .627”/.607” | LSA112+2

Designed for:  LS2, LQ4 and LQ9 Engines (346-364ci) with Cathedral Port Heads (as they're equipped with stock)
Basic Operating RPM Range:  2500-6800
Expected Horsepower Gains:  50-60RWHP over the stock camshaft in a well-optimized setup
Expected Torque Gains:  25-35RWTQ over the stock camshaft in a well-optimized setup
Aftermarket Headers Required:  Longtubes suggested for maximum power gains
Stall Converter Required:  Yes, 3600+RPM
Rear Gear Upgrade Required:  Suggested for maximum performance (3.73+ for manual transmissions, 3.42+ for automatics)
Works Well with Nitrous:  Yes (shot size less than 250)
Will Pass Most Smog Emissions:  No

Our Tick Performance Street Heat Stage 2 Camshaft for LS2 Engines is designed for those who want to turn heads with a nice lopey idle!  You'll gain a very noticeable amount of power while retaining great street manners with this camshaft.  We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (sold separately.)  Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.

Option Guide: Do I need the 3-Bolt Conversion Kit?
In 2007, GM began installing a camshaft in select LSx engines that used one large bolt to attach the timing chain gear.  All Tick Performance Elite Series Camshafts use 3 bolts to attach the timing chain gear, as the earler LSx engines used.  If your engine is a 2007 or newer (or if you're not sure which camshaft style you've got), we suggest adding the 3-Bolt Conversion Kit during checkout for an extra $24.99.  This Conversion Kit includes everything that you'll need to convert your single-bolt setup over to the 3-Bolt setup (the proper timing chain gear and a set of 3 ARP camshaft bolts.)  If you'd prefer to retain the single bolt style camshaft (not recommended), please place your order with us via phone.

1x GM 12586481, 1x ARP 134-1003