STOCK Converter Camshaft for LS3 & L99 Engines

Brand NEW for 2015! Tick Performance proudly offers our Elite Series of Camshafts designed specifically for LS3 & L99 Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge!  Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.

Tick Performance STOCK Converter Camshaft for LS3 & L99 Engines
219/231 | .619”/.598” | LSA115+5

Designed for:  LS3, L92, LY6, L76 and L99 Engines with Square Port Heads (as they're equipped with stock)
Basic Operating RPM Range:  1500-6700
Expected Horsepower Gains:  45-50RWHP over the stock camshaft in a well-optimized setup
Aftermarket Headers Required:  Suggested for maximum performance
Stall Converter Required:  No
Rear Gear Upgrade Required:  No
Works Well with Nitrous:  Yes, up to 150HP
Will Pass Most Smog Emissions:  No

This Tick Performance STOCK Converter Camshaft was designed for LS3 & L99 owners that do not wish to install an aftermarket stall converter.  This cam is very unique in this regard, as most if not all aftermarket camshafts require some sort of looser stall converter.  By keeping the overlap low we have designed a camshaft that can be idled at the stock idle RPM, thus allowing the stock converter to be utilized!  This camshaft will not work in vehicles equipped with VVT or DOD.  If your vehicle still has these systems, they will need to be deleted at the time of the camshaft install (parts sold separately.)  We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (also sold separately.)  Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.