This steel clutch alignment tool is designed for use during any clutch install on any LTx or LSx application and features longer-than-stock splines for proper line up of twin and triple disc clutch discs. Reusable! Not included with many clutch kits, but is very convenient to have! 26 spline.
Note: This is a non-returnable item.
6 Reviews Hide Reviews Show Reviews
-
Steel clutch alignment tool
When I bought my twin disc clutch the vendor told me I would need a steel input shaft/alignment tool. I thought I had a broken T56 input shaft but did not. The plastic tool that comes with the twin disc clutch sucks. This is a far better tool for the job, and does exactly as promised.
-
Must have tool...
Used the plastic tool that came with the monster twin disc kit, trans would not go in even though the plastic tool slid right in. When I received the steel alignment tool I found that it would not slid in past the pilot bearing. Realigned clutch with the steel tool and trans did finally slide in without too much effort.
-
Worked perfect
Tried a plastic advance auto alignment tool for my twin disk and it just would not line up. Bought this and realigned clutch and the trans went right in first try. A must have.
-
Clutch Alignment Tool
Worked perfectly. Couldn't get the t56 to bolt up to ls1 even after using the plastic alignment tool that came with the clutch kit. Ordered the steel 1 and worked like a charm and transmission mated right up to engine after that.
