Bleeding the late model GM hydraulic system in it's stock form is a hassle. After you tear apart the car to gain access to the bleeder, you've got to have someone pump the pedal while you're under the car cracking the bleeder and hoping everybody's timing is right - not to mention keeping the reservoir full! It's easy to see how something so simple can quickly turn into a huge ordeal.
With our "One Man Job" Remote Clutch SPEED Bleeder Line, Tick Performance is taking great strides in making things much easier on you. At 4'+ in length, you're able to route the line to nearly anywhere on the car you want. Here in house, we usually zip tie it to a brake line coming out of the brake master cylinder so it's easy to reach with the hood popped. Another huge improvement is our SPEEDbleeder end - allowing you to simply crack it open one time and close it once the air is out of the system, instead of having to open and close the bleeder with every pump of the pedal.
Why wrestle with your hydraulic system every time you want to bleed it? Rely on Tick Performance to make the job much easier for you with our "One Man Job" Remote Clutch SPEEDbleeder Line. A must-install next time you've got the clutch out of your C6 or C7 Corvette & Z06.
- Requires clutch removal for install
- Fits 2005-2013 Corvette C6 & Z06 & ZR1, LS2, LS3, LS7 or LS9 Engines
- Fits 2014+ Corvette C7 Stingray, Grand Sport & Z06, LT1 or LT4 Engines
10 Reviews Hide Reviews Show Reviews
-
I'd pay $100 for this hose anyday good thing it's $50
Comes right off the slave and ran the hose top side by the fluid reservoir and literally flush the whole hydraulic system with 5-6 pumps and takes 3 mins vs putting ur car in the air and spending hours reaching in the bell housing and getting fluid everywhere
-
Awesome
Fast shipping, high quality product.
