Level 1 Standard T56 Rebuild for 03-04 Cobra

This complete price includes Parts (Listed Below), Labor AND Free Shipping on your T56 (both ways!)

Our Level One Standard Rebuild includes the following:

• Complete tear-down, degrease & thorough inspection of entire transmission
• Bronze 1-4 Fork Pads
• Bronze 5-6 & Reverse Fork Pads
• Bronze Shifter Cup Bushing
• Billet 3-4 Synchronizer Keys (with upgraded springs)
• New OEM 1-2, 5-6 & Reverse Keys & Springs
• Carbon Fiber Synchronizer (blocker) Rings
• New Front Seal
• New Rear Seal
• End-play set to our custom specifications
• Professional Reassembly done 100% by hand
• 90-Day Warranty
• 5 Qts of Fluid

Option Guide: Should I upgrade to the 26 Spline Input Shaft?
From Ford, 2003-04 Cobras came with a 10 spline input shaft that has proven to be the weak link in the drivetrain time and time again. During a rebuild, consider this upgrade a must-do if you do any racing at all. This option adds no extra turnaround time.

Option Guide: Should I upgrade to the Billet Throwout Bearing Guide Tube?
From Ford, 2003-04 Cobras came with a stamped steel guide tube that always seems prone to breakage. During a rebuild, we highly suggest upgrading to this billet steel tube so you never have to worry about breakage again. This option adds no extra turnaround time.

Option Guide: Do I need New Bearings?
Although they’re not included with our rebuild packages, we consider bearings a smart thing to do for everyone and a must do for those of you with more than 120,000 miles on the clock. If you’ve had any strange noises coming from your transmission, bearings are a wise investment. We use Timken and Koyo Bearings. This option adds no extra turnaround time.

Option Guide: Should I Upgrade to the Viper Mainshaft?

ON NATIONAL BACKORDER CALL FOR CURRENT AVAILABILITY

If you need to support slightly more power than the 450ft/lbs (rear wheel) that the Level One is rated for, upgrading to a Viper Mainshaft as part of this rebuild will increase the torque rating of your transmission to 550ft/lbs (rear wheel.)  This option buys you our Custom-length Viper 30-spline Mainshaft, Modified Speedometer Wheel, Viper-sized Output Shaft Bushing, Viper-sized Output Shaft Seal, Yoke, and the custom machining and installation necessary.  This option adds 2-3 days to your turnaround time.

Option Guide: Should I get Micro Polish?
Tick Performance Micropolishing consists of rotating a part at relatively slow speeds. As the part rotates through the machine, non-abrasive media makes contact on all surfaces of the part. At Tick Performance, our Micropolishing has two processes. The first process introduces a cutting solution into the media. The cutting solution very slowly smooths the surface of the part from the gentle wiping of our non-abrasive media. The second process is the polishing itself that utilizes a different type of solution. This solution acts as a varnish that makes the metal part look like it has a chrome finish. The Tick Performance Micropolishing adds horsepower gains, achieving higher RPMs while simultaneously lowering operating temperatures and adding longer service life.

Option Guide: Should I have the Bungs & Sprayers Installed?
It is seen time and time again in big horsepower cars that do standing mile or high speed pulls often, and road race or autocross applications; the input shaft bearing can become starved for fluid and fail, causing a chain reaction of damage inside the transmission.  With this option, we install and weld bungs and spray tubes inside your transmission that will direct transmission fluid onto your input shaft and third gear teeth that are prone to failure. This kit now includes our Hi-Flow Transmission Fluid Pump Kit. This kit will require some plumbing and electrical wiring. This option adds no extra turnaround time.

Option Guide: Should I opt for an Aftermarket Gear Set?

CALL FOR AVAILABILITY & ESTIMATED LEAD TIME

With the ability to make over 1000hp on the street today, transmissions are pushed harder and harder and G-Force understands. With that in mind G-force manufactures a 6-Speed upgrade kit available for any T-56 variation. Whether you have a power adder or just big cubic inches, we know this is what you have been waiting for. We have TRUE bolt-in kits to fit Viper, Corvette, Camaro, and Cobra applications along with custom installation kits that allow for an even wider range of installations. With the optional G-Force mainshafts, these kits have the ability to handle approximately 1200* horsepower and 1000 ft-lb. of torque depending on the application. Our kit combines the strength of a full-out race transmission with the factory look, drivability, and fit of an OEM installation. The G-Force Street 6-Speed conversion requires no external case, tailhousing, or shifter modifications to your existing T-56. This means that your stock mounting hardware and dimensions will be utilized. This is not a one-size-fits-all kit. We have kits specifically designed for each application including special inputs for each vehicle.
In order to achieve the exceptional horsepower and torque handling abilities this kit has to offer, G-Force has again gone back to its racing heritage. While totally reengineering the gear design and tooth profile, we also added gear width wherever possible and have gone with our vast experience in terms of material selection. We use a proven 9310 alloy material for the gears, and this means exceptional gear strength. These kits can utilize the factory overdrive gears or they can be upgraded with G-Force Overdrives as well.
These G-Force Street 6-Speed kits feature helical gearing to maintain a comfortable noise level while still maintaining exceptional strength.

While slightly noisier than a stock T-56, the increased gear noise in not excessive and nothing like a straightcut, race-only transmission. We have tested slightly differing designs to come up with the best strength/quietness levels possible when dealing with the excessive power that these kits are made to cope with.

To further enhance the performance of your T-56, G-Force has come up with some additional performance options. Quicker, smoother shifting is always a plus when driving any manual transmission, and this is why G-Force has manufactured a double/triple cone conversion for your Viper, Camaro, or Cobra. While initially found only in C5 and C6 Corvette applications, this conversion allows for the installation of the superior shifting double/triple cone synchronizer setup to be installed into any T-56. If you own a Corvette, you already have this setup in your transmission. We do, however, have upgraded mainshafts made specifically for the C5-C6 transmissions. If you are looking for a transmission to be used in a project car or just want to trade in your worn-out T-56, G-Force can build you a complete unit with our gear kit already installed. We can use a new or remanufactured core depending on what you would like.
G-Force also has a dog ring (face tooth) version of this transmission available as well.
We also have our 2.71 gear kit available in a dog-ring version. The overdrives are kept synchronized to provide a smooth, stock-like driving experience in 5th and 6th gears. Like the synchronized versions of our gear kits, the dog-ring kit is rated at 1200hp, plus or minus depending on the specific application.
*Obviously, power and torque ratings vary more or less depending upon weight, clutch, tire, RPM, etc. Available ratios are listed below, please put in the order notes what ratio you would like.

Option Guide: Should I opt for Faceplating?
If you drive your car on the street, no. Suggested for all manually shifted dedicated racecars ONLY, faceplating is a procedure very similar to proshifting, but much more durable and longer lasting. Faceplating completely eliminates the possibility of missing a shift by removing the stock synchronizers and opening up the engagement window for faster, higher rpm shifting. This is definitely the way to go if you have a T56 in your racecar and you're looking for the quickest shifts possible. Due to the harsh nature of this process, we do not recommend this option for cars that see any street driving.  For more information, click here or click here to watch a video of a customer of ours driving his Faceplated Trans Am.  This option adds 4-5 weeks to your turnaround time.

Option Guide: Should I have my transmission Painted or Powdercoated?
During any rebuild here at Tick Performance, all transmission cases are washed and degreased. Even after this treatment, many are stained, discolored and just don’t look as good as they did when new. Our media blast and paint service gives the transmission a much more professional, finished look. Available in Black Satin or Silver. This option adds no extra turnaround time.  You can also opt for our powdercoating service, which is much more durable than paint. Also available in Black Satin or Silver. This option adds 10-15 days to your turnaround time.