Tick 1800HP Air-to-Water Intercooler for Holley Ram Intakes

Manufactured in North Carolina, USA here at Tick Performance, our Air-to-Water Intercooler gives you all the benefits of an A2W intercooler without the hassle of extra plumbing! This custom fabricated intercooler bolts directly to any Holley Hi-Ram or Mid-Ram Intake Manifold and can efficiently support up to 1,800 Horsepower!

The new billet design offers a superior quality and appearance without an increase in price. The intercooler features four -16ORB (AN) Female inlet/outlets providing you with options on plumbing. See the drop-down menu for block-off plugs. 

Specs 

• Supports up to 1,800hp 

• 4.875" overall thickness

• 4.5" thick USA-made core

• Four -16 AN Female Inlets/Outlets 

• Billet 6061-T6 aluminum alloy construction

• Includes top-quality upper and lower mounting hardware and seal

• 100% machined and welded in NC, USA at Tick Performance

• Additional discount available for purchasing a Holley Manifold at the same time! Contact us for details.

Overall Heights

• 4.875" overall thickness

• Holley LS Low-Ram With Intercooler 14.07"

• Holley LS Hi-Ram Total With Intercooler 17.32"

Measurements are based on the specs provided by Holley and include the tallest point of the intakes using the front-mount throttle body hats. The intercoolers will work with any Holley ram hat. Please don't hesitate to contact our friendly sales staff with any questions you may have!

See Dyno Testing Here; 100hp Gains! 

Looking For A Water Pump? Check out our recommended pump and completion kits.