The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension's SB009 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 1-inch bar stock, the SB009 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using the factory mounting locations in the lower control arms.
BMR Suspension designed the SB009 sway bar for street performance, autocross, and road race applications. The rear sway bar gives you a 200% increase in sway bar rate. This rate increase allows you to drive harder through corners with minimal body roll. The SB009 attaches to your A-body using the factory sway bar mounts. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!
BMR Suspension's SB009 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!
- Fits 1964-1972 GM A-body
- Designed for street performance, autocross, and road race applications
- Dramatically reduces body roll
- 200% increase in sway bar rate
- Cold formed to better resist torsional fatigue
- Manufactured from solid 32mm heavy-duty bar stock for increased strength
- Durable powdercoat finish
- 1-hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.
