A Panhard rod is a suspension link that both locates the lateral position of the rear axle housing and controls side-to-side movement. Factory Mustang Panhard rod can interfere with larger aftermarket differential covers. Built from DOM steel tubing and CNC-formed laser cut steel plate, BMR Suspension's PHR008 Panhard rod relocation bracket is designed to space the Panhard bar away from the differential for additional diff cover clearance.
BMR Suspension designed the PHR008 to work well for street performance, drag race, and road race applications. The heavy-duty construction and design eliminates the interference with aftermarket differential covers. The heavy-duty construction of the PHR008 gives you additional clearance with all the strength needed for high Panhard bar loads. This is the perfect Panhard rod for the enthusiast that requires maximum performance from the suspension. When performance is a must, rely on BMR Suspension!
BMR Suspension's PHR008 Panhard rod relocation bracket is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.
***NOTE: BMR Highly recommends using a Panhard Bar with spherical bearings on each end, to eliminate any binding, when using the PHR008 Panhard Relocation Bracket. BMR recommends using the PHR012 or MPHR012 with this Panhard Bar Relocation Bracket.***
***13-14 GT500 - Track Pack models with electronic Bilstein Shocks may have clearance issues with this bracket.***
- Fits 2005-2014 Ford Mustangs
- Relocates Panhard rod to provide additional space for aftermarket diff covers
- MIG-welded
- Designed for street performance, drag race, and road race applications
- Durable red or black hammertone powdercoat finish
- 1-hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.
***Does not fit on a Moser 9" housing.***
