MOUNTING BRACKETS - DUAL FAN (#0422)

Mounting Brackets - Dual Fan (PART #0422) This kit is designed to either attach two Davies, Craig Thermatic Fans from the range of 8 inch to 14 inch or a single 16 inch high flow fan. The Dual Fan Mounting Bracket Kit offers the freedom to pre-assemble the fans outside the engine bay. It also provides flexible positioning of the complete assembly on to the radiator without the need to connect through the radiator core. SPECIFICATIONS KIT COMPONENTS Length 760mm 2 x Metal Brackets Weight 2.15kg 4.7lbs 8 x M5 x 16 Hex Flanged Screws Height With Fan 8" Fan 221mm 8 x M5 Square Nuts 9" Fan 252mm 1 x Instructions 10" Fan Slim 288mm 12" Fan 300mm 14" Fan 360mm 16" Fan 410mm UNIVERSAL FAN FITTING KIT (SOLD SEPARATELY] SINGLE FAN MOUNTING HARDWARE KIT (12V) (1000) SINGLE FAN MOUNTING HARDWARE KIT (24V) (1001) DUAL FAN MOUNTING KIT - UNIVERSAL 12V (1002) DUAL FAN MOUNTING KIT - UNIVERSAL 24V (1003) FAN & TRANS OIL COOLER MOUNTING HARDWARE (UNIVERSAL) (0578) The Davies, Craig Universal Fan Fitting Kit includes all parts necessary for mounting and wiring any 12- and 24-volt electric fans – all Davies, Craig Thermatic® Fans and other electric fan models. THERMATIC® / ELECTRIC FAN RANGE Thermatic® / Electric Fan Size 12 Volt 24 Volt Airflow Max Current Weight Height (mm) Width (mm) Depth (mm) Part # Part # 8” Thermatic® Fan 0135 0136 400 CFM 5.0A (12 Volt) 2.4A (24 Volt) 0.88 kg 1.9 lb 211 213 56 9” Thermatic® Fan 0160 0161 591 CFM 6.5A (12 Volt) 3.25 (24 Volt) 0.93 kg 2 lb 242 250 55 10” Thermatic® Fan 0145 0146 693 CFM 7.0A (12 Volt) 3.5A (24 Volt) 1.13 kg 2.5 lb 270 290 64 10” Slimline Thermatic® Fan 0147 0148 696 CFM 7.0A (12 Volt) 3.5A (24 Volt) 1.13 kg 2.5 lb 278 275 56 11” Brushless Thermatic® Fan 0120 N/A 1050 CFM 11.0A (12 Volt) 2.2 kg 4.9 lb 315 305 98 12” Thermatic® Fan 0162 0163 847 CFM 9.0A (12 Volt) 4.5 (24 Volt) 1.45 kg 3.2 lb 293 293 58 14” Slimline Thermatic® Fan 0164 0165 1021 CFM 11.0A (12 Volt) 5.5 (24 Volt) 1.5 kg 3.3 lb 350 348 76 14” Hi-Power Thermatic® Fan 0107 0108 1500 CFM 13.0A (12 Volt) 6.5 (24 Volt) 2.5 kg 5.5 lb 350 348 94 16” Thermatic® Fan 0166 0172 2120 CFM 19.0A (12 Volt) 9.5 (24 Volt) 3.0 kg 6.6 lb 400 424 97 What size Thermatic® Fan do I need? If your car make is not listed in our Model Selection Guide (see the Davies, Craig website, www.daviescraig.com.au/catalogues) we suggest the following: Measure your radiator core dimensions (width, depth and clearance - refer diagram below) and refer to “Fan Models” to check which fan/s will fit your core. Davies Craig Thermatic® Fans are reversible (Ex: Brushless models) which means they can be mounted upstream or downstream, as illustrated below. In general, one large fan will have better airflow than two smaller fans. Where radiator is rectangular there may be no choice but to fit two smaller fans; choose the largest that can be accommodated in space available. The fan can also be mounted offset from centre to clear engine components when mounted in the downstream position. Note: Fans should not be fitted on opposite sides of radiator core unless these are offset such that the airflow of one is not interfering with the airflow of the other. If you require advice, please contact Davies, Craig for assistance. Fan Mounting Direction