EWP®130 Alloy/Digital Controller Combo
Turbocharge your engine cooling with the Davies, Craig EWP®130 alloy Electric Water Pump and your choice of Thermatic® Fan and an LCD EWP®/Fan Digital Controller.
Like all the EWPs, this unit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and worked engines which develop excessive heat.
The EWP®130 configuration mirrors the highly successful EWP®80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.
The EWP®130 will be supplied with one each of the 35mm (1?) straight and elbow alloy adaptors, O rings and mounting hardware along with two 3mm (?) rubber adaptor sleeves. The respective 38 mm (1½) alloy adaptors and 6mm (¼) rubber adaptor sleeves are optional.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engines existing mechanical water pump. This essential performance accessory increases power to your vehicles drive wheels and improves coolant temperature control.
The EWP®130 is a universal, do-it-yourself, easy installation fitment to engines up to five litres. By removing the parasitic power losses of belt-driven water pumps, the EWP®130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings.
Combine it with the LCD EWP®/Fan Digital Controller and the pump continues to run after youve switched off, eliminating heat soak and extending engine life.
The EWP®130 and LCD EWP®/Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.
The Davies, Craig EWP® header adaptor kit can replace the mechanical water pump completely.
Turbocharge your engine cooling management:
- Universal fit
- More power
- More cooling
- Increase fuel efficiency
- Extend engine life
- World-leading technology
- Lightweight alloy
Technical Specifications
| 12 Volts | 24 Volts |
|---|---|
| Operating voltage: 3V DC to 15V DC | Operating voltage: 20V DC to 27V DC |
| Maximum current: 10A @ 13V | Maximum current: 5.5A @ 24V |
| Flow rate (max): 130 L/min (34.34 US gal/min) @ 13V DC | Flow rate (max): 130 L/min (34.34 US gal/min) @ 24V DC |
| Operating temp.: -40° to 130°C (-40° to 266°F) | Operating temp.: -40° to 130°C (-40° to 266°F) |
| Pump design: Clockwise centrifugal with volute chamber | Pump design: Clockwise centrifugal with volute chamber |
| Pump weight: 1,226 grams (2.7 lb) | Pump weight: 1,226 grams (2.7 lb) |
| Pump material: Aluminium (powder coated) | Pump material: Aluminium (powder coated) |
| Burst pressure: 500 kPa (72.5 psi) | Burst pressure: 500 kPa (72.5 psi) |
| Seal: Ceramic face seal | Seal: Ceramic face seal |
| Fits hose sizes: 35mm to 51mm (1? to 2) | Fits hose sizes: 35mm to 51mm (1? to 2) |
