Comp Cams Hi-Tech Pushrods: 5/16", 7.350" (.105 Wall)

Tick Performance is proud to be a warehouse distributor for the entire COMP Cams product line. If you don't see what you're looking for on our website, please contact our friendly sales staff either by phone or email for assistance! The pushrod is one of the most important pieces of the valve train, but all too often it’s taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today’s all-out race engines demand the highest quality components at every step, and COMP Cams® Hi-Tech™ Pushrods fill that requirement. Hi-Tech™ Pushrods feature a one-piece design from .080” wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification. One-piece construction from .080” wall, seamless chromemoly Heat-treated for extended durability & guide plate compatibility Precision formed & reinforced ends Black-oxide finished with laser etched part number & length Ideal for serious street performance & race applications