Associated Comments:
- See 5621 for LS1, LS2, LS3, LS6 3-Bolt applications.
- See 5623 for single-bolt VVT applications.
- The 5622 3-bolt for GM LS7/LS9 is different from the 5621 due to the different sized harmonic balancer bolt.
- See 5624 for Cam Install Kit for Chevrolet Camaro w/ LT1/LT4.
Additional Attributes:
- GTIN: 00036584387879
- Amazon ASIN: B07MGZ6N9L
- C.A.R.B. E.O. Number: N/A
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, but must meet tailpipe emission standards for year of vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: Yes
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, but must be a race/competition only vehicle.
- C.A.R.B. Exemption Reason: No impact on pollution output of vehicle.
- Cam Bolts Included: Yes
- Cam Retaining Plate Included: No
- Crank Bolt Included: Yes
- Crank Seal Included: Yes
- Distributor Gasket Included: No
- EGR Valve Gasket Included: Yes
- Engine Family/Fitment: Chevrolet Corvette w/ GEN V LT1
- Exhaust Manifold Gaskets Included: No
- Exhaust Pipe Gasket Included: No
- Fuel Injector O-Rings Included: No
- Fuel Pump Gasket Included: No
- Gasket Set Type: Cam Install Kit
- Head Bolts Included: No
- Head Gaskets Included: No
- Intake Gaskets Included: No
- Lifter Tray Bolts Included: No
- Lifter Trays Included: No
- Oil Pan Gasket Included: No
- Rear Main Seal Included: No
- Timing Cover Gaskets Included: No
- Upper Intake Manifold Plenum Gasket Included: No
- Valley Pan Included: No
- Valve Cover Gaskets Included: Yes
- Valve Stem Seals Included: No
- Water Neck Gasket Included: No
- Water Pump Gaskets Included: Yes
Extended Information:
- Emissions : CARB Eligible
- Life Cycle Status: Superseded
Packaging:
- Quantity of Each: 1
- Package UOM: KT
- Dimension: 12 x 6.5 x 2.5 inches
All warranty questions, claims or otherwise should be directed toward the manufacturer, COMP Cams.