Enhance the stability of your 2010 and newer Chevrolet Camaro with a Total Suspension Bushing Kit from BMR Suspension. BMR's polyurethane Total Suspension Bushing Kit (BK030, BK021, and BK022) drastically increase stability over the factory rubber bushings, which do little for performance. BMR designed its polyurethane bushing kit from 95-durometer polyurethane. This material offers huge reductions in deflection without excessive increases in NVH. Each bushing is manufactured to strict tolerances, using exact molds, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style.
BMR's Total Suspension Bushing Kit offers huge increases in performance over the stock rubber bushings. The OE bushings are made from soft rubber. This soft material produce excessive bushing deflection during aggressive maneuvering. BMR's polyurethane bushings replace the OE rubber bushing, eliminating almost all bushing deflection, increases handling stability, and cornering ability, while giving you a much-improved overall feel in any performance driving situation. The reduction in deflection also drastically reduces wheel hop, caused by excessive bushing deflection.
The kit includes polyurethane bushings for the front lower control arms, front radius rods, steering rack, rear trailing arms, differential, and rear cradle.
Designed for street performance, drag race, and handling applications, BMR Suspension BK031 Total Suspension Bushing Kit is the perfect solution for any Camaro being used for performance driving.
BMR Suspension's BK031 Total Suspension Bushing Kit is available in red with zinc-coated hardware. Installation time is about 7-10 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!
NOTE: BK008 steering rack bushing is not used on vehicles equipped with electric steering. The BK022 Front Suspension Bushing Kit can be used on electric steer vehicles, however the BK008 steering rack bushing cannot be installed.
- Fits 2010-newer Chevrolet Camaros
- Kit consists of BK030, BK021, BK022
- Designed for street performance, drag race, and handling applications
- 95-durometer polyurethane bushings
- Decreased bushing deflection
- Zinc-coated inner sleeves
- 7-10 hour installation time
- Proudly designed in the U.S.A.
- Proudly made in the U.S.A.
