Heat is the enemy of horsepower. When compressing air, intake temperatures will go up. This tank is built to combat that issue! By providing increased cooling capability, the vehicle will make more horsepower. This tank has shown up to 30whp gains when adding coolant and up to 40whp when adding ice. Intake temperatures as high as 190 were normal with a factory system, after the tank we have seen temperatures below ambient. This means big gains in reliability and will translate to more consistent performance. This tank has a capacity of 1.7 gallons and is the biggest on the market. This is an essential upgrade for the street and the strip.
Tank Information:
- 1.7 Gallons of extra capacity
- All fittings included and are aluminum, not plastic or brass like others on the market
- 1/2 inch NPT inlet/outlet size
- Outlet has screen welded onto it so you can add ice into system
- 3/8 inch NPT bung for the aluminum ball valve to allow fast and easy draining
- Drain hose to route to the bottom of the vehicle to allow for a clean, hassle free draining of the tank
- Tig welded
- Made out of 6061 grade aluminum
- Billet fill cap with course threads and an O-ring seal to allow for fast fills and no leakage
- Detailed instructions with pictures
- Black textured powder coat that matches factory plastics
- Biggest tank available on the market
- Installs between the strut tower brace and the firewall on the passenger side of the engine
