Heat is the enemy of horsepower. When compressing air the intake temperatures will go up. This tank is built to combat that issue. With a massively upgraded cooling capacity and the ability to add ice the vehicle will make more horsepower. In dyno testing on a bone stock 2015 Z06, after 3 pulls we lost 100 wheel hp. With this tank added we have seen up to 25whp gains from adding coolant, and up to 40whp when adding ice. Intake temperatures as high as 210 were normal with a factory system. After the tank we have seen temperatures below ambient. This means big gains in reliability and will translate to more consistent performance. This tank has a capacity of almost 3 gallons and is the biggest on the market. This is an essential upgrade for the street, strip, or road course. This tank is a bolt on for any C6 Z06, it can also be used on a base C6 Magnusson and Edelbrock superchargers using different fittings. We used this tank with a Magnusson supercharger and saw an increase of 50whp when adding ice!
Tank Information:
- Almost 3 Gallons of extra capacity
- All fittings included and are aluminum (not plastic or brass like others on the market)
- Tank and lid are made in the USA (Ohio)
- 1/2 inch NPT inlet/outlet size
- Outlet has screen welded onto it so you can add ice into system
- 3/8 inch NPT bung for the aluminum ball valve to allow fast and easy draining
- Drain hose to route to the bottom of the vehicle to allow for a clean, hassle free draining of the tank
- Tig welded
- Made out of 5052 grade aluminum
- 3.5 inch 6061 Billet fill cap with coarse threads and an O-ring seal to allow a fast fill with no leakage
- Detailed instructions with pictures
- Black textured powder coat that matches factory plastics
- Biggest tank available on the market
