As racers, safety should be our top priority. This cage kit is designed to help the customer get started with a 25.5 design. Just like the title says, (High and Tight), this kit puts the bars as high and as tight as possible against the roof and b-pillars. Does NOT retain interior. Applications must undergo t-top removal and use carbon or oem fiberglass roof skin. Whether you are a shop or a do-it-yourselfer we hope to make your 25.5 install painless with a good starting point.
Kit weighs in at 100 pounds.
All of our kits come standard:
- 4130 Chromoly Tubing
- Pre-Bent
- Pre-Notched
- Mild Steel Plates to Weld to Floor
Standard Bars Include:
- Main Hoop
- A-Pillars
- C-Pillars
- C-Pillar to Main Hoop Bars
- Harness Bar
- Door Bars with X-Brace
- Rocker Bars
- Dash Bar
- Windshield Bar
- Rear Crossmember (In Car Over Tunnel)
- Lower Vertical Support Bars
Color Key:
Red: 1-5/8 x 0.083
Blue: 1-1/4 x 0.065
Yellow: 1-1/2 x 0.065
Cyan: 3/4 x 0.065
Green: 1 x 0.065
